Head Reducing Tee
- group name
- Bulge fittings
- Min Order
- 1 piece
- brand name
- ZHENGKANG
- model
- CB30-31
- update time
- Mon, 25 Jul 2011 18:11:00 GMT
Packging & Delivery
-
Min Order1 piece
Briefing
DN:15-50mm
Material: SUS304,304L,316,316L
Pres:1.6mpa
Detailed
| Reducer Tee(Head Reducing) | |||||
| Nominal Size (mm) | Nominal Size (mm) | H (mm) | L (mm) | M (mm) | N (mm) |
| T20X15X20 | 20-15 | 48 | 13.3 | 26 | 13.3 |
| T25X15X25 | 25-15 | 52 | 15.3 | 29.5 | 13.3 |
| T25X20X25 | 25-20 | 57 | 15.3 | 29.5 | 13.3 |
| T32X15X32 | 32-15 | 57 | 15.8 | 35 | 13.3 |
| T32X20X32 | 32-20 | 61 | 15.8 | 35 | 13.3 |
| T32X25X32 | 32-25 | 67 | 15.8 | 36.5 | 15.8 |
| T40X15X40 | 40-15 | 58 | 19.3 | 37.9 | 13.3 |
| T40X20X40 | 40-20 | 65 | 19.3 | 38 | 13.3 |
| T40X25X40 | 40-25 | 68 | 19.3 | 39.5 | 15.3 |
| T40X32X40 | 40-32 | 78 | 19.3 | 41.8 | 15.8 |
| T50X15X50 | 50-15 | 60 | 19.3 | 43.5 | 13.3 |
| 50X20X50 | 50-20 | 64 | 19.3 | 44 | 13.3 |
| T50X25X50 | 50-25 | 70 | 19.3 | 46.5 | 15.3 |
| T50X32X50 | 50-32 | 80 | 19.3 | 48 | 15.8 |
| T50X40X50 | 50-40 | 86 | 19.3 | 48 | 19.3 |
Bulging pipeline system is our unique patented product, which is widely used in cold hand hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. and adopted by many national key projects, such as the National Stadium (Nest) and Crown of East(Shanghai Expo),Compared with traditional pipeline system, it’s not only more economical, safer and healthier, but also easier and faster for installation with longer service life.
1. Pipe material: AISI 304, 304L, 316, 316L
2. Pipe fitting material: AISI 304, 304L, 316, 316L
3. Pipe standard: GB/T12771-2008 Pipe fitting standard: Q33033-J15.898-2006
4. Thread Standard: BSP or NPT
5. Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.
6. O-Ring Seal material: EPDM (black): max working pressure: 1.6Mpa, working temperature: -15 to 110, Suit medium: cold and hot water, compressed Air etc; CIIR, NBR, HNBR.
7. DN: 15-200mm, wall thickness: 0.6-3.0mm
The procedure of our product development and manufacturing are accord with our internal standard, which is higher than the national standard. Please contact us for further information.
Bulge system catalog