Follow us :

Tee with Male Thread Branch

Tee with Male Thread Branch
Tee with Male Thread BranchTee with Male Thread BranchTee with Male Thread Branch
group name
Press fittings V profile
Min Order
1 piece
brand name
ZHENGKANG
model
CB10-52
update time
Tue, 30 Aug 2011 20:34:17 GMT

Packging & Delivery

  • Min Order1 piece

Briefing

Tee with Male Thread Branch Press system
Size:15-54mm
Material:Stainless steel AISI304/316L,carbon steel
O-ring:EPDM,HNBR

Detailed

 
Tee with Male Threaded Branch(Style:CB10-52)
Nominal
Size
(mm)
P×M×P
Nominal
Size
(Inches)
P×M×P
L (mm) Z (mm) L1 (mm) T1 (mm)
12×1/2×12 3/8×1/2×3/8 82 38 40.5 1.5
15×1/2×15 1/2×1/2×1/2 84 40 42 1.5
20×1/2×20 3/4×1/2×3/4 90 44 44 1.5
20×3/4×20 3/4×3/4×3/4 90 44 51 1.5
25×1/2×25 1×1/2×1 96 48 47 1.5
25×3/4×25 1×3/4×1 96 48 54 1.5
25×1×25 1×1×1 96 48 62 1.5
32×1/2×32 11/4×1/2×11/4 106 52 50.5 1.5
32×11/4×32 11/4×11/4×11/4 106 52 71 1.5
40×11/4×40 11/2×11/4×11/2 130 58 72 1.5
50×11/2×50 2×11/2×2 150 70 85 1.5
50×2×50 2×2×2 150 70 92.6 1.5
 

Press fitting pipeline system is widely used in cold hand hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc. Our pipes and fittings ZHENGKANG brand are adopted by many national key projects, such as the National Stadium (Nest), the Crown of East (Shanghai Expo), and the city for Asian Games.  Compared with traditional pipeline system, it’s not only more economical, safer and healthier, but also easier and faster for installation with longer service life.

1. Pipe material: AISI 304/304L, 316/316L, and carbon steel.

2. Pipe fitting material: AISI 304/304L, 316/316L, and Q235.

3. Pipe standard: DIN 10312-2003,   Pipe fitting standard: DVGW W534-1995

4. Thread Standard: BSP or NPT

5. Anneal: all stainless steel pipe fittings are annealed in inert gases before packing

6. O-Ring Seal: EPDM, NBR, HNBR.

EPDM (black): max working pressure 1.6Mpa, working temperature from -15℃ to 110℃, Suit medium: cold and hot water, compressed Air etc.

7. Size: 15-108mm   pipe wall thickness: 1.0--2.0mm 

8. Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.

The procedure of our product development and manufacturing is in accord with our internal standard, which is higher than the national standard. Please contact us for further information. 

Press Fittings DVGWPress Fittings DVGW